Haier washer error codes
Haier washers use two sets of codes: newer front-loaders show Err codes such as Err1 or Err2, while top-loaders and older models show short codes like E1 or FA. Haier air conditioners show E codes for indoor-unit faults and F codes for outdoor-unit faults, and FL on portables when the water tank is full. The same code can mean different things on different appliances, so match the code and appliance exactly.
| Code | What it means | Fix |
|---|---|---|
| Err1 | Door not locked | Easy DIY |
| Err2 | Drain failure | Easy DIY |
| Err4 | Heater error | Moderate DIY |
| Err5 | Water not filling | Easy DIY |
| Err7 | Motor fault | Technician job |
| Err8 | Too much water | Technician job |
| UNB | Unbalanced load | Easy DIY |
| E1also CLR FLTR | Drain failure | Easy DIY |
| E2 | Lid or door open | Easy DIY |
| E3 | Unbalanced load, will not spin | Easy DIY |
| E4 | Water not filling | Easy DIY |
| FA | Water level sensor fault | Technician job |
| F2 | Water at critical level | Technician job |
| FC2 | Communication error | Technician job |