Haier washer E2 code: lid or door open

The lid or door is open or not locked, so the washer has stopped. Close it firmly and press Start/Pause again.

Likely causes

Listed from most to least common.

1. Lid or door left open or not fully closed
2. Clothing caught in the door or lid
3. Lid switch or door lock faulty

How to fix the E2 code

Unplug the washer or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Close the lid or door

   Close it firmly until it clicks. Make sure no clothing is caught in it.

2. 2

   Step 2: Press Start/Pause

   The washer should carry on from where it stopped.

3. 3

   Step 3: Reset if needed

   If the code returns with the lid shut, unplug the washer for 5 minutes and try again.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Haier washer lid switchCheck prices

When to call a technician

If E2 shows with the lid or door firmly shut, the lid switch or door lock has failed and needs replacing.

A typical repair for this code costs $100–$250 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Front-load washers (HW series)
• Top-load washers (HWT and HWM series)
• Portable and compact washers

Codes can differ slightly between models. Your owner's manual is the final word and is available from Haier support.

Common questions