Haier washer E3 code: unbalanced load, will not spin

The laundry is unevenly spread or the washer is not level, so it will not spin. Spread the load out, level the washer and press Start/Pause again.

Likely causes

Listed from most to least common.

1. Laundry bunched on one side of the drum
2. One heavy item washed on its own
3. Washer not level
4. Worn suspension rods or shock absorbers

How to fix the E3 code

1. 1

   Step 1: Spread the load evenly

   Open the lid and spread the laundry evenly around the drum. Untangle sheets and long items.

2. 2

   Step 2: Level the washer

   Check it with a level and adjust the feet so it sits flat and does not rock.

3. 3

   Step 3: Press Start/Pause

   The washer should continue and spin.

You'll need: Level, adjustable wrench.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Haier washer suspension rodsCheck prices

When to call a technician

If E3 keeps showing with normal, evenly spread loads, the suspension may be worn.

A typical repair for this code costs $150–$300 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Front-load washers (HW series)
• Top-load washers (HWT and HWM series)
• Portable and compact washers

Codes can differ slightly between models. Your owner's manual is the final word and is available from Haier support.

Common questions