Maytag washer LdL code: lid not locking

The top-load washer could not lock the lid. An item under the lid or detergent build-up around the lid lock is the usual cause.

Likely causes

Listed from most to least common.

1. Clothing sticking up and blocking the lid
2. Something lying on or under the lid
3. Detergent build-up around the lid lock
4. Faulty lid lock assembly

How to fix the LdL code

Unplug the washer or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Check under the lid

   Open the lid and push the load down below the rim. Remove anything that could stop the lid from closing flat.

2. 2

   Step 2: Clean the lid lock area

   Unplug the washer. Wipe detergent build-up from around the lid lock and the strike on the lid with a damp cloth.

3. 3

   Step 3: Try the cycle again

   Plug the washer in, close the lid and press Start/Pause.

You'll need: Damp cloth, flashlight.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Maytag washer lid lock assemblyCheck prices

When to call a technician

If LdL comes back with the lid clear and clean, schedule service. Do not try to bypass the lid lock.

A typical repair for this code costs $120–$250 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Front-load washers (MHW series, including Maxima)
• Top-load HE washers (MVW series, including Bravos)
• Older Centennial top-load washers with electronic controls

Codes can differ slightly between models. Your owner's manual is the final word and is available from Maytag support.

Common questions