Samsung dishwasher bE code: button stuck

The control panel thinks a button is being held down. A stuck, wet or dirty button is the usual cause.

Likely causes

Listed from most to least common.

1. Button pressed and held, or stuck down
2. Moisture or grease on the control panel
3. Something leaning on the panel
4. Faulty control panel

How to fix the bE code

1. 1

   Step 1: Turn off the dishwasher

   Switch it off and wait a minute.

2. 2

   Step 2: Clean and dry the panel

   Wipe the control panel with a soft, slightly damp cloth, then dry it fully.

3. 3

   Step 3: Press each button

   Turn it back on and press every button once. Check each one clicks and springs back.

You'll need: Soft cloth.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Samsung dishwasher control panelCheck prices

When to call a technician

If a button will not release or the code keeps returning, the control panel needs replacing by a technician.

A typical repair for this code costs $150–$350 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• DW80 series dishwashers
• Bespoke and StormWash models

Codes can differ slightly between models. Your owner's manual is the final word and is available from Samsung support.

Common questions