GE washer LId code: lid open or needs opening (top-load)

The lid is open, or three cycles ran in a row without the lid being opened. Open and close the lid, then start a new cycle.

Likely causes

Listed from most to least common.

1. Lid open or not fully closed
2. Three cycles started in a row without opening the lid
3. Item caught under the lid
4. Lid switch or lid lock faulty

How to fix the LId code

1. 1

   Step 1: Open and close the lid

   Lift the lid fully, then close it. This resets the three-cycle limit GE builds into some models.

2. 2

   Step 2: Check for obstructions

   Make sure no clothing or items are caught under the lid or sitting on the tub rim.

3. 3

   Step 3: Start a new cycle

   Choose a cycle and press Start. The Lid Locked light should come on as normal.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• GE washer lid lock / switchCheck prices

When to call a technician

If LId keeps showing after you open and close the lid, the lid lock or switch may be faulty. GE advises contacting service.

A typical repair for this code costs $120–$280 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Top-load washers with a digital display (2015 and newer)
• Top-load washers with status lights only
• Front-load washers (GE and GE Profile)

Codes can differ slightly between models. Your owner's manual is the final word and is available from GE support.

Common questions