GE oven F1 code: keypanel or control fault

The control has found a problem with the keypanel or its circuit. GE groups F1 with its other keypanel codes and says the keypanel often needs replacing.

Likely causes

Listed from most to least common.

1. Brief power glitch or surge
2. Moisture behind the touch panel
3. Failed keypanel
4. Loose ribbon cable at the control
5. Faulty electronic oven control

How to fix the F1 code

Unplug the oven or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Turn the oven off

   Press Clear/Off and let the oven cool for one hour if it was in use.

2. 2

   Step 2: Reset power at the breaker

   Turn off the circuit breaker for the oven for one to two minutes, then turn it back on. Watch the display to see if F1 returns.

3. 3

   Step 3: Dry the control panel

   Wipe the panel with a dry cloth. If liquid got behind it, leave the breaker off for a few hours to dry.

You'll need: Soft dry cloth.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• GE range keypanelCheck prices
• GE oven control boardCheck prices

When to call a technician

Call a technician if F1 returns after a power reset. The keypanel or control board needs testing to find which part failed.

A typical repair for this code costs $150–$450 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• GE electric and gas ranges (JB, JGB, JS and JGS series)
• GE Profile and Café ranges (PB, PGB, PS, CES and CGS series)
• Single and double wall ovens (JTS, JTD, PTS and CTS series)

Codes can differ slightly between models. Your owner's manual is the final word and is available from GE support.

Common questions