LG dishwasher LE code: wash motor error

The wash motor is not running normally. It may be the motor or the wiring to the control board. Reset the power, then call for service.

Likely causes

Listed from most to least common.

1. Wash motor failure
2. Loose or damaged wiring between motor and control board
3. Food or debris jamming the pump
4. Control board fault

How to fix the LE code

Unplug the dishwasher or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Turn the dishwasher off

   Press the Power button to turn the dishwasher off.

2. 2

   Step 2: Reset the power

   Switch off the dishwasher's breaker for 10 seconds, then switch it back on.

3. 3

   Step 3: Clean the filter

   Twist out the filter, rinse it and refit it so debris is not reaching the pump.

4. 4

   Step 4: Run another cycle

   Start a normal cycle and watch to see if LE returns.

You'll need: Soft brush.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• LG dishwasher wash motorCheck prices

When to call a technician

If LE returns after a reset, the motor or its wiring needs testing. This is live electrical work, so call a technician.

A typical repair for this code costs $200–$450 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• LDF, LDT and LDP series
• QuadWash and TrueSteam models

Codes can differ slightly between models. Your owner's manual is the final word and is available from LG support.

Common questions