LG dishwasher IE code: water inlet error

The dishwasher is not filling with water. Check the supply valve under the sink and the inlet hose.

Likely causes

Listed from most to least common.

1. Supply valve closed
2. Inlet hose kinked
3. Low water pressure
4. Faulty inlet valve

How to fix the IE code

Unplug the dishwasher or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Open the supply valve

   Make sure the valve under the sink is fully open.

2. 2

   Step 2: Check the hose

   Look for kinks in the inlet hose under the sink and behind the toe kick.

3. 3

   Step 3: Reset and test

   Turn the dishwasher off at the breaker for a minute, then run a short cycle.

You'll need: Flashlight.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• LG dishwasher water inlet valveCheck prices

When to call a technician

If the supply is open and pressure is normal, the inlet valve needs testing and possibly replacing.

A typical repair for this code costs $120–$280 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• LDF, LDT and LDP series
• QuadWash and TrueSteam models

Codes can differ slightly between models. Your owner's manual is the final word and is available from LG support.

Common questions