Frigidaire oven F13 code: control memory error

The electronic oven control found an error in its internal memory (EEPROM). A power surge or brief outage can cause it, and a power reset sometimes clears it. If not, the control board has failed.

Likely causes

Listed from most to least common.

1. Power surge or brief power outage
2. Electronic oven control memory fault
3. Failing electronic oven control board

How to fix the F13 code

Unplug the oven or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Press Cancel

   Press Cancel or Clear to see if the code clears.

2. 2

   Step 2: Reset the power

   Switch the range off at the circuit breaker for 30 seconds, then turn it back on and try a bake.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Frigidaire electronic oven control boardCheck prices

When to call a technician

If F13 returns after a power reset, the electronic oven control needs to be replaced.

A typical repair for this code costs $250–$500 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Gallery electric and gas ranges
• Professional ranges and wall ovens
• Standard freestanding ranges with electronic oven control

Codes can differ slightly between models. Your owner's manual is the final word and is available from Frigidaire support.

Common questions