Frigidaire oven F11 code: shorted keypad

The oven control thinks a touch key is stuck down or shorted. It often follows a spill on the control panel, moisture or holding a key too long, and a power reset often clears it.

Likely causes

Listed from most to least common.

1. Spill, grease or moisture on the touch panel
2. A key held down too long, such as during calibration
3. Worn or damaged keypad membrane
4. Faulty electronic oven control

How to fix the F11 code

Unplug the oven or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Press Cancel

   Press Cancel or Clear once to see if the code goes away.

2. 2

   Step 2: Clean and dry the panel

   Wipe the control panel with a soft cloth that is barely damp, then dry it well. Do not spray cleaner directly on the panel.

3. 3

   Step 3: Reset the power

   Switch the range off at the circuit breaker for 30 seconds, then turn it back on.

You'll need: Soft cloth.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Frigidaire range keypad membraneCheck prices

When to call a technician

If F11 comes back after a power reset, the keypad or the oven control board needs replacing.

A typical repair for this code costs $150–$400 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Gallery electric and gas ranges
• Professional ranges and wall ovens
• Standard freestanding ranges with electronic oven control

Codes can differ slightly between models. Your owner's manual is the final word and is available from Frigidaire support.

Common questions