KitchenAid dishwasher F2E1 code: stuck key or control panel error

The control thinks a button on the control panel is stuck down. A power reset can clear it, but a code that returns usually needs a new panel.

Likely causes

Listed from most to least common.

1. Button stuck or held down
2. Moisture or grease getting into the keypad
3. Damaged control panel (user interface)
4. Loose connection between the panel and the main control

How to fix the F2E1 code

Unplug the dishwasher or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Check the buttons

   Press each button once and make sure none feels stuck. Wipe the panel with a damp cloth and dry it.

2. 2

   Step 2: Reset the control

   Unplug the dishwasher or switch off its breaker for 30 seconds, then restore power.

You'll need: Soft cloth.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• KitchenAid dishwasher control panelCheck prices

When to call a technician

If F2E1 returns after a reset, schedule service. The control panel or its wiring needs to be checked.

A typical repair for this code costs $200–$450 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Top-control dishwashers (KDTE, KDTM and KDPM series)
• Front-control dishwashers (KDFE series)
• Models without a display that flash the Clean light

Codes can differ slightly between models. Your owner's manual is the final word and is available from KitchenAid support.

Common questions