Frigidaire dishwasher i50 code: drain or wash motor problem

The control found a fault with the drain pump or wash motor. A power reset may clear it. If it returns, the motor needs testing.

Likely causes

Listed from most to least common.

1. Debris jamming the drain pump or wash pump
2. Failed wash motor
3. Failed drain pump
4. Loose wiring at the motor
5. Faulty main control board

How to fix the i50 code

Unplug the dishwasher or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Reset the dishwasher

   Press Cancel, or switch it off at the breaker for 5 minutes. Then try a quick cycle.

2. 2

   Step 2: Clear the sump

   With power off, remove the filters and look for glass, bones or seeds near the pump opening.

3. 3

   Step 3: Listen on the next cycle

   Humming with no water spray, or grinding, points to a jammed or failed motor.

You'll need: Flashlight, towels.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Frigidaire dishwasher wash motorCheck prices
• Frigidaire dishwasher drain pumpCheck prices

When to call a technician

If a reset does not clear i50, call a technician. Testing and replacing the motors means working near live wiring.

A typical repair for this code costs $200–$450 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Gallery dishwashers (FGID series)
• Professional dishwashers (FPID series)

Codes can differ slightly between models. Your owner's manual is the final word and is available from Frigidaire support.

Common questions