Frigidaire dishwasher i10 code: low water or no water

The dishwasher is not getting enough water. Check the supply valve, the inlet hose and the water pressure.

Likely causes

Listed from most to least common.

1. Water supply valve closed or partly closed
2. Inlet hose kinked
3. Low water pressure
4. Faulty water inlet valve

How to fix the i10 code

Unplug the dishwasher or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Open the supply valve

   Make sure the valve under the sink is fully open.

2. 2

   Step 2: Check the inlet hose

   Look for kinks or crushing behind the toe kick and under the sink.

3. 3

   Step 3: Reset the dishwasher

   Switch it off at the breaker for 5 minutes, then run a quick cycle.

You'll need: Flashlight.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Frigidaire dishwasher water inlet valveCheck prices

When to call a technician

If water supply is good and the code persists, the inlet valve or flow meter needs testing.

A typical repair for this code costs $120–$280 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Gallery dishwashers (FGID series)
• Professional dishwashers (FPID series)

Codes can differ slightly between models. Your owner's manual is the final word and is available from Frigidaire support.

Common questions