Frigidaire dishwasher i30 code: leak detected

Water has reached the base pan and raised the leak float. Turn off the dishwasher, dry the base and look for the source.

Likely causes

Listed from most to least common.

1. Too many suds from the wrong detergent
2. Leaking door seal
3. Loose hose or fitting
4. Cracked sump or pump seal

How to fix the i30 code

Unplug the dishwasher or switch it off at the breaker before removing any panel or filter.

1. 1

   Step 1: Turn off power and water

   Switch off at the breaker and close the supply valve.

2. 2

   Step 2: Dry the base pan

   Remove the toe kick panel and soak up the water. Make sure the float can move freely.

3. 3

   Step 3: Let it dry

   Leave the dishwasher off for 24 hours.

4. 4

   Step 4: Look for the leak

   Run a short cycle with the toe kick off and watch for drips.

You'll need: Screwdriver, towels, flashlight.

Parts that may need replacing

Check your model number on the label inside the door or on the back before ordering.

• Frigidaire dishwasher door gasketCheck prices

When to call a technician

If water keeps appearing in the base, have a technician check the pump seals and internal hoses.

A typical repair for this code costs $150–$350 in the US, including parts and labor. Prices vary by area and model.

Models this applies to

• Gallery dishwashers (FGID series)
• Professional dishwashers (FPID series)

Codes can differ slightly between models. Your owner's manual is the final word and is available from Frigidaire support.

Common questions